Material Transfer

OUTRIGGERS, CROSS TRANSFERS, EJECTORS AND MORE

For most of our customers across the Industry, the Number One most expensive piece of their business is moving steel materials around their facility. As bandsaw manufacturers we have seen first hand, as material is moved from stacked locations into place for sawing and once again after cutting. HE&M Integrated Sawing Systems dramatically streamline the flow of cutting operations to improve the process time of cutting jobs on a ‘per cut’ basis. 


LIFT AND CARRY CROSS TRANSFERS

Next generation cross transfers ready for shipping at the HE&M saw factory in Pryor, Oklahoma.

LIFT AND CARRY TRANSFER TRUCK

Heavy duty transfer trucks lift materials for movement across transfer arms.

LIFT AND CARRY SYSTEM

Material is picked up and dropped into place with a proven air suspension system.

VERTICAL ALIGNMENT ROLLERS

Heavy duty rollers do the important work of lining up material to the datum line for accurate cutting.

EJECTOR BARS

HE&M offers several types of Ejector Bar Systems to help operators move post-cut material from roller tables onto transfer arms or parts tables. Ejector bars are managed from the Main Control allowing for the mechanical movement of material, which adds another level of operator safety and productivity within your cutting operation.

TILT-A-ROLL LOADING TABLE

Staging round materials for cutting jobs is a great way to improve the efficiency of your bar cutting operation. HE&M “Tilt-A-Roll” loading tables are fabricated to hold the heaviest of loads and can be individually leveled or set at a slight angle to allow material to roll toward the main conveyor table. Simple screw style handles adjust table angle, while tabs that dip below the table level then raise up to carry bars onto the table.

OUTRIGGERS

A set of Outriggers can be combined with our ejector bar system to maximize off-loading of materials from the cutting zone. The ejector bar can fully stroke materials to the far edge of the tabling without pushing materials off the edge, making it easier for workers to remove completed jobs from the table area.

MOVEABLE TABLING SECTION

For horizontal miter saw models such as the Hurricane and WF190RMB, it’s sometimes necessary to employ a small section of roll-in-roll-out tabling next to the saw to allow the saw structure to move into position. These saw sections are on tracks to make the adjustment quick & easy.

Need To Improve Productivity?

HE&M Saw is the leading manufacturer of integrated sawing systems that combine high accuracy bandsaws with material handling equipment. And with over 70 models of high quality American Made bandsaws, chances are we have the right saw for you. Drop us a quick line and let’s get started today!

*
*
*
Your Message Has Been Sent! Thank you for contacting us.
Oops, An error has ocurred! See the marked fields above to fix the errors.